Specialist
Solution
Product
Document
Picture

Renovator/ Protector for metals, paints, plastics... on materials used in the industry
  • Nano Shine Guard® is a product that provides prevention and cure. It allows quick and easy renovation and protection of metals, plastics, paints, concrete, stone... on material used in the industry (petroleum sector, thermal power field, other industries etc…).
  • Nano Shine Guard® revives the original colour of all metals, paints, plastics... affected by weather conditions. It ensures the protection of material against splashes from concrete, mortar and coatings. Thanks to its anti-adherent properties, Nano Shine Guard® makes daily cleaning of equipment easy.
  • Nano Shine Guard® is used both indoors and outdoors on horizontal and vertical surfaces of porous or low-porosity material: metals, paints, plastics, limestone, terra cotta, clay, brick, natural and reconstituted stone, blue stone, concrete, marble, granite etc.
  • Nano Shine Guard® is used in new works or renovation.
  • Restores colour lost to weather and makes a shine.
  • Makes cleaning easier.
  • Non-corrosive.
  • Long-term effect.
  • Can be used on metals, paints, plastics...
  • Quick and easy to use.
Apply with a low-pressure atomised with Viton joint, 2 bars pressure or a roller.

Clean tools and equipment used with white spirit immediately after use.
  • Apply the product to a clean, dry surface free of dust and grease (moisture content less than 5% by mass).
  • In case of use of a cleaner, rinse thoroughly until the surface is free from any trace of cleaning product and completely dry.
  • Thoroughly shake the package before use and use the pure product: do not dilute or mix with another product.
  • Carry out a preliminary test on a small area.
Step 1: Apply
Apply in one thin and regular layer.
Do not overload the support; all of the product must penetrate the surface.

Step 2: Wipe
After 10 minutes, the treated material must be wiped off and polished with a lint-free microfibre cloth.
Drying protected: 24 hours.
  • Physical state at 20°C: Liquid
  • Colour: Colourless
  • Odour: Characteristic
  • pH: NA
  • Flash point: 40°C
  • Boiling point [°C]: 180°C
  • Density: 1.03 ± 0.02
  • Water solubility [vol/vol]: None
  • COV: < 160 g/l*
Consumption depends on the nature of the support.
The following values are given for information:
  • Metals: 15 to 25 m2/kg
  • Paints: 15 to 35 m2/kg
  • Plastics: 15 to 25 m2/kg
  • Concrete: 10 to 20 m2/kg
  • Stone: 10 to 20 m2/kg
5 Kg.
  • Store in a dry place at a temperature between 5°C and 30°C.
  • Storage: 12 months from date of manufacture, in original packaging unopened.
  • Always handle the product in an aerated area. Otherwise, wear an ABEK-type mask.
  • For perfect application and effective protection, Nano Shine Guard® must be shaken and used when the temperature of the supports is above 10°C and below 40°C.
  • Do not apply in rainy or very hot weather.
  • The ideal air temperature is between 10°C and 40°C.
  • Respiratory protection: Wear an ABEK-type mask.
  • Protection of hands: Wear fluoride rubber gloves.
  • Protection of skin: Wear suitable safety clothing.
  • Protection of eyes: Wear hermetic protective goggles (ref. standard EN 166).
  • If swallowed: Do not induce vomiting. Contact a doctor or specialist.
KEEP OUT OF THE REACH OF CHILDREN
Chemical nature
Polysiloxane mixture.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 63
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.732.709
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other