Specialist
Solution
Product
Document
Picture
Concentrated super cleaner strips all heavily soiled surfaces
  • Net’Guard® Ultra 4 in 1 is a multi-functional cleaner with 4 actions: degreasing, cleaning, stronger and hyper-active. It quickly and easily removes the most persistent greasy stains and dirt (food grease, mineral oils, tyre marks, etc. on all types of materials and supports.
  • Net’Guard® Ultra 4 in 1 consists of easily biodegradable and effective molecules without soda or potash and does not require neutralisation after rinsing with water. In contrast to commonly-used corrosive or irritant products, Net’Guard® Ultra 4 in 1 offers every advantage in terms of ease of use, effectiveness and safety. One application, followed by rinsing, without leaving it to dry, eliminates grease stains and dirt due to atmospheric and industrial pollution.
Net’Guard® Ultra 4 in 1 can be used inside and outside on floors, facades and walls. Ideal for cleaning all types of materials of concrete, natural or reconstituted stone, terracotta, tiles, stoneware, marble, paving stones, asphalt, composite wood etc. It does not alter plastic or rubber.
  • Powerful, rapid-action cleaner.
  • Removes the most persistent marks and greasy stains (mineral oils, greases, tyre marks, etc.).
  • Ready to use, can be applied to all mineral substrates.
  • Non-corrosive, non-irritant and without neutralising after rinsing.
  • Complies with the regulation of 19/12/13 on cleaning of equipment that may come into contact with food.
Apply with a lower pressure spray.
Clean tools and equipment used with water immediately after use.
  • Net’Guard® Ultra 4 in 1 is a concentrated, ready-to-use product.
  • Always test on the substrate before application.
  • Apply the product liberally to the substrate to be treated.
  • Allow it to work for 15 to 30 minutes depending on the soiling to be removed. 
  • Brushing with a standard broom may improve the effectiveness of the product.
  • Do not allow the product to dry before rinsing with water.
  • Rinse the entire surface with a pressure washer with hot or cold water to increase the effect.
  • It is not necessary to neutralise the treated surface.
  • Physical state at 20°C: Liquid.
  • Colour: Blue.
  • Odour: None.
  • pH: 10.9 ± 0.5.
  • Boiling point [°C]: Not specified.
  • Density: 1.05 ± 0.01.
  • Water solubility [vol/vol]: Total.
  • Flash point [°C]: Not applicable.
Figures stated are indicative only. 5 to 8 m2/litre.
5 and 20 litres.
  • Store in a dry place at a temperature between 5°C and 30°C.
  • Storage: 48 months from date of manufacture, in original packaging unopened.
Respects the environment and is ecological: 
  • Water-based product, without soda and potash.
  • Non-hazardous and non-toxic.
  • The surface agents contained in this formula are biodegradable to more than 60%* in 28 days.
  • Complies with the regulation of 19/12/13 on cleaning of equipment that may come into contact with food.
  • Protect any metal surfaces (aluminium, zinc, tin, copper, light alloy etc.).
  • For a perfect application, Net’Guard® Ultra 4 in 1 must be used when the temperature of the substrates is between 5°C and 30°C.
  • Do not apply in rainy or very hot weather. 
  • The ideal air temperature is between 5°C and 30°C.
  • Do not mix with another product.
  • Keep out of the reach of children.
  • Respiratory protection: No breathing apparatus is required under normal conditions of use provided there is adequate ventilation.
  • Protection of hands: Wear latex gloves.
  • Skin protection: Wear work clothes.
  • Protection of eyes: If there as a significant risk of splashing, wear protective goggles.
  • If swallowed: Do not induce vomiting. Contact a doctor or specialist.
KEEP OUT OF REACH OF CHILDREN
Chemical nature
Aqueous solution based on surfactants of vegetable origin.

Prevention
To avoid any new soiling after cleaning and drying the substrate, it is recommended that you apply a preventive treatment with a product from the protection range ProtectGuard® Pro.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website: 
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 66
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.655.836
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other