Biodegradable cleaner requiring no neutralisation
  • Guard Cleaner® Eco Soiled Floors is a cleaner-degreaser designed to clean greasy stains and soiling caused by atmospheric and industrial pollution.
  • Guard Cleaner® Eco Soiled Floors is formulated with efficient and easily biodegradable molecules. It has all the advantages of an ecological product in terms of being easy to use, effective and safe. That is not the case with alternative irritant or corrosive products.
  • Soiling can be easily removed by wiping or scrubbing, without allowing the surface to dry.
  • Guard Cleaner® Eco Soiled Floors is soda and potash-free and does not require neutralisation after rinsing.
  • Ideal to clean interior and exterior horizontal substrates (floors, paved ground surfaces...). It can be applied to all types of substrates such as concrete, natural and synthetic stone, terracotta, tiling, marble, stoneware, composite wood…
  • Guard Cleaner® Eco Soiled Floors can also be used on walls and facades lighlty soiled like new concrete, newly built surfaces, painted surfaces...
  • Powerful cleaner, quick efficiency.
  • Easy and ready to use. 
  • EU food contact compliance**.
  • No need to pH neutralize after rinsing. 
  • Non corrosive and non irritant.
  • Can be applied to all mineral materials.
Apply with a low pressure hand spray unit, a low pressure spray unit o a brush.
Tools and equipment should be cleaned with water immediately after use.
  • Use neat: do not dilute. 
  • Always test on a small hidden portion of the substrate before applying.
  • Shake the product well before use.
  • Apply the product liberally.
  • Allow it to act from 15 to 60 minutes, depending on the staining to be removed.
  • Brushing with a hard bristle brush can increase the efficiency.
  • Whilst the surface is still wet, rinse with a high pressure cleaner, with cold or hot water for a better efficiency or simply wipe clean with a cloth.
  • Treated substrates do not need to be neutralised.
  • Physical state at 20°C: Liquid.
  • Colour: Uncoloured.
  • Odour: None.
  • pH: 10.5 ± 0.5.
  • Boiling point [°C]: 100°C.
  • Relative density: 1.05 ± 0.01.
  • Solubility in water [vol/vol]: Total.
  • Flashpoint [°C]: Not applicable.
The following values are for guidance only: 5 to 8 m2/litre.
5 and 20 litres.
  • Store in a dry place at a temperature of between 5°C and 30°C.
  • Shelf-life: 48 months from date of manufacture, in original unopened can.
Ecological and respects the environment:
  • Water-based product.
  • Soda and potash-free.
  • Safe and non-toxic.
  • Surfactants used in this formula are biodegradable to 60%* in 28 days.
  • VOCs < 1 g/l*.
  • Protect metallic surfaces (aluminium, zinc, tin, copper, light alloys).
  • For best results it is essential that Guard Cleaner® Eco Soiled floors is used when the temperature of the substrates is between 5°C and 30°C.
  • Do not apply during rain or in very hot weather. Air temperature between 5°C and 30°C.
  • To remove efflorescence and concrete deposits, apply first Guard Remover® Eco Efflorescence & cement. 
  • Do not dilute or mix with another product.
  • Breathing protection: No breathing protection equipment is required under normal use conditions with suitable ventilation.
  • Hand protection: Wear household rubber gloves.
  • Skin protection: Wear protective clothing.
  • Eye protection: If there is a significant risk of splashes, wear protective goggles.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
KEEP OUT OF REACH OF CHILDREN 
Chemical nature
Aqueous solution with organic-based surfactants.

Prevention
To prevent future soiling, it is recommended to protect the surface with a protection treatment from the ProtectGuard® range.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website: 
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 63
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.655.821