Concentrated fungicidal and water-repellent treatment destruction of green deposits, lichens, fungi and algae on roofs, facades and floors

• All-in-one treatment: destroys green deposits, algae, fungi andprotects materials.
• Guard Cleaner® Algae & Protect is a preventative and curative treatment without rinsing with a long-lasting effect.
• Curative: Guard Cleaner® Algae & Protect destroys all parasitic vegetation which is then removed by rain or simple cleaning.
• Preventative: The water-repellent property protects materials and inhibits the reappearance of micro-organisms. Ultra concentrated formula, Guard Cleaner® Algae & Protect can be diluted up to 1 volume of product for 19 volumes of water.
• 1 litre of concentrate  can treat up to 100m².
• Guard Cleaner® Algae & Protect does not contain chloride or organic solvents. It is completely harmless to treated surfaces and does not alter the colour.

• Guard® Cleaner Algae & Protect is applied outside on all types of material: terracotta, slate, concrete, natural stone, asphalt, shingle, wood, painted surface, etc.
• Guard® Cleaner Algae & Protect is totally universal, so it allows roofs, walls, balconies, fountains, monuments, enclosures, terraces, garden paving, awnings, tennis courts etc. to be treated.

• All-in-one treatment: fungicidal and waterproofing in a single step.
• Curative & preventative.
• The water-repellent property protects materials and inhibits the reappearance of microorganisms.
• Long-lasting effects.
• High penetrating power.
• Colourless, does not change the appearance of the substrate.
• Does not alter materials.
• Ultra-concentrated product: up to 1 volume of product for 19 volumes of water.
• Economical: 1 litre of concentrate = 40m²
• The substrate may be painted after application.

• If the support is very invaded by green deposits, brush or scrape before application.

• Concentrated product, do not use neat.
• Active product: 1L of product to 19L of water.
• Very active product and reinforced action: 1L of product to 9L of water.

• Always carry out a preliminary test before application to check the good penetration of the product and the appearance after complete drying (24 hours).
• Apply uniformly in dry weather on a dry or slightly moist substrate, spraying until the substrate is saturated. Impregnate the surface to be treated well, it is necessary that the product penetrates at depth for the best results.
• Time needed without rain after application: 1 hour.
• Do not rinse and let the product act.
• The elimination of microorganisms is gradual and can take several weeks to several months depending on the fouling rate and germ type. To eliminate residues faster, it is possible to use a pressure washer.

• Physical state at 20°C: Liquid.
• Colour: Light yellow.
• Odour: Neutral.
• pH: 13.5 ± 0.5.
• Boiling point [°C]: Not relevant.
• Density: 1.04 ± 0.01.
• Water solubility [vol/vol]: Total.
• VOC: < 75 g/l*.

• Diluted 1/19: 1L of concentrated product = 20L of ready-to-use product being 100m² treated.
• Diluted 1/9: 1L of concentrated product = 10L of ready-to-use product being 50m² treated.

• 5 to 6m²/litre of ready-to-use product. Figures stated are indicative only.

• Store in a dry place at a temperature between 5°C and 30°C.
• Storage: 2 years from date of manufacture, in original packaging unopened.

• Hazardous product – follow the usage precautions. Use biocides with care. Before any use, read the label and the information on the product.
• Prolonged contact of the product with skin may burn, so wear gloves.
• Do not apply to low-porous, organic, metallic or waterproof materials. Do not overcharge the substrate – remove all excess before it dries. Risk of white stains in case of excess.
• For a perfect application and effective action, the product must be used when the temperature of the substrates is between 5°C and 30°C.
• Do not apply in rainy or very hot weather. Air temperature between 5°C and 30°C.
• Take care not to spray on the surrounding vegetation. Keep away from food products, drinks and animal feed.
• Do not mix with pond or fountain water. Rinse well remove any residues before putting the water into ponds, fountains, pools etc.
• Do not mix with another product.

• Respiratory protection: No breathing apparatus is required under normal conditions of use provided there is adequate ventilation. Do not inhales gases, vapours or aerosols.
• Protection of hands: Wear sealed nitrile rubber gloves.
• Skin protection: Protective clothing (protection and apron), boots.
• Protection of eyes: CE-marked protective eyewear.
• If swallowed: Do not induce vomiting. Contact a doctor or specialist.

• Quaternary ammonium and water-repellent agent in solution.

• For better protection and to avoid new soiling after treating the substrate, it is recommended that you finish off the treatment with a product from the ProtectGuard® or ImperGuard® range.