Specialist
Solution
Product
Document
Picture
Concentrated high performance concrete remover
GTR® 100 is a highly concentrate solution specifically developed to periodically remove gross build-ups of concrete and cement, restoring vehicle surfaces, tools and equipment (cement-mixer lorries, on-site mixers and infrastructure surfaces...)
GTR® 100 is a new-generation product designed to meet the different needs of users in terms efficiency, environmental impact and preserving treated surfaces.
GTR® 100 is based on an organic molecule that is particularly small found in trace form in most fruit and vegetables. This molecule is safer than other products of the market. Once synthesised, this molecule acts as a surface de-structuring agent which loosens sand aggregate bindings without damaging the underlying surface.
Ideal for refurbishing equipment and during the weekly internal and external washes of cement-mixer lorries, on-site mixers and infrastructure surfaces.
  • Highly efficient cleaning action.
  • Concentrate product for weekly washes.
  • Easily biodegradable.
  • Non flammable.
  • Quick & easy to use.
  • Outstanding materials compatibility, surfaces and equipment, can be used on metal, glass, rubber, paints, etc...
Tools and equipment should be cleaned with water immediately after use.
  • It is essential to do tests first and to wear individual protective equipment.
  • Shake the product well before use.
  • Do not mix the product with other products. GTR® 100 can be used neat or diluted with water (1 volume of product with 1 volume of water).
  • Dampen the surface to be treated before ap-plying GTR® 100.
  • Spray the product uniformly. Its slightly foaming aspect allows to check if the application is uniform on the substrate.
  • Leave for a minimum contact time of between 30 - 40 minutes to allow the solution to soften and loosen concrete and cement deposits. Contact time will be dependant on the thickness of aggregate deposit to be removed and the temperature (action time is enhanced by the substrate’s temperature being warmer).
  • Scrub the treated surface with a hard bristle brush in order to speed up the descaling process by mechanical action.
  • Rinse all surfaces and equipment thoroughly with clean water at high pressure.
  • Do not allow GTR® 100 to dry before rinsing.
  • Physical state at 20°C: Liquid.
  • Colour: Pale yellow.
  • Odour: Caracteristic.
  • pH: 0.9 ± 0.5.
  • Relative density: 1.13 ± 0.02.
  • Solubility in water [vol/vol]: Miscible.
  • Flashpoint [°C]: Not applicable.
Usage depends on the thickness of residue; thicker deposits may require more than one application. The following values are for guidance only: 5 to 8 m2/kg.
25 kg containers, and 230 kg, 575 kg or 1150 kg IBC containers.
  • Store in a dry place at a temperature of between 5°C and 30°C.
  • Shelf-life: 24 months from date of manufacture, in original unopened can.
  • Wear protection goggles as well as gloves and overalls.
  • For best results it is essential to use the pro-duct when the temperature of the substrates is above 5°C and below 35°C.
  • Avoid applying during heavy rain or in very hot weather. Air temperature between 5°C and 35°C.
  • Breathing protection: Wear an appropriate mask.
  • Hand protection: Wear household rubber gloves.
  • Skin protection: Wear protective clothing over exposed areas of skin.
  • Eye protection: Wear protective goggles.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
PROFESSIONAL PRODUCT.
Chemical nature:
Formulation based on organic compounds.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 76
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.732.728
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other