Biodegradable cleaner requiring no neutralisation
  • Guard Remover® Eco Efflorescence & cement is a cleaning product that quikly removes efflorescences, cement, concrete and tartar deposits. 
  • Guard Remover® Eco Efflorescence & cement is a new generation product that is significantly less hazardous than other products available in the market. Indeed, Guard Remover® Eco Efflorescence & cement is not classified as either corrosive or irritant. 
  • Guard Remover® Eco Efflorescence & cement has been designed in response to the increasing demands of users in terms of safety, effectiveness, impact on the environment and protection of treated substrates. 
  • Guard Remover® Eco Efflorescence & cement does not require neutralisation after rinsing.
Ideal to clean interior and exterior floors and walls. It can be applied to all types of substrates such as concrete, natural and synthetic stone, terracotta, tiling…
  • Powerful stripper.
  • Quick efficiency.
  • Quick & easy to use. 
  • No need to pH neutralize after rinsing. 
  • Non corrosive & non irritant.
  • Ready to use.
Apply with a low pressure hand spray unit, a roller or a brush.
Tools and equipment should be cleaned with water immediately after use.
  • Shake the product well before use and apply neat.
  • Always test on a small hidden portion of the substrate before applying.
  • To increase the efficiency, first wet the surface with water.
  • Apply the product liberally to the surface.
  • Allow it to act 5 minutes maximum.
  • Do not allow the product to dry prior to rinsing.
  • Rinse the entire substrate with a high pressure washer once the material deposits have softened. Otherwise, brush off using a thick bristle broom, and then rinse with water from a hosepipe whilst brushing at the same time.
  • Physical state at 20°C: Liquid.
  • Colour: Clear/pale yellow.
  • Odour: Lemon.
  • pH: < 2.
  • Relative density: 1.05 ± 0.05.
  • Solubility in water [vol/vol]: Total.
  • Flashpoint [°C]: Not applicable.
The following values are for guidance only: 3 to 6 m2/litre.
1, 5 and 20 litres.
  • Store in a dry place at a temperature of between 5°C and 30°C.
  • Shelf-life: 48 months from date of manufacture, in original unopened can.
Ecological and respects the environment:
  • Water-based product.
  • Safe and non-toxic.
  • VOCs < 1 g/l*.
  • Surfactants used in this formula are biodegradable to 70%* in 28 days.
  • Do not mix with another product notably bleach (risks of emanation of toxic chloric gas).
  • When used indoors, apply in well-ventilated area.
  • Protect glass and metallic surfaces (aluminium, zinc, tin, copper, chromium, light alloys...).
  • On concrete or artificial stone, allow the produt to act less than 3 minutes. Always carry out a test. 
  • For best results it is essential that Guard Remover® Eco Efflorescence & cement is used when the temperature of the substrates is between 5°C and 30°C.
  • Do not apply during rain or in very hot weather. Air temperature between 5°C and 30°C.
  • Breathing protection: No breathing protection equipment is required under normal use conditions with suitable ventilation.
  • Hand protection: Wear chemical resistant gloves.
  • Skin protection: Wear waterproof protective clothing.
  • Eye protection: If there is a significant risk of splashes, wear protective goggles.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
KEEP OUT OF REACH OF CHILDREN 
Chemical nature
Formulation is based on organic compounds.

Prevention
To prevent future soiling, it is recommended to protect the surface with a protection treatment from the ImperGuard® or ProtectGuard® range.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website: 
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 110
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.732.672