• Porous materials: natural or reconstituted stone
• Floors
• New
• External or internal

• Avoids degradations due to freeze thaw cycles.
• Avoid the capillary absorption of the water of the floor.
• Non film-forming.
• Not harmful.
• Water-based product.
• Low VOC rate.
• UV resistant, does not turn yellowish.
• Invisible once dry.
• Ready to use.
• Easy to use.
• Non flammable.

Apply with an airless type sprayer or roller.

• Shake before use.
• Always make a test before using on a large surface.
• Do not dilute the product.
• Apply the product on a dry clean surface with no dust.
• Apply the product using a roller or an Airless sprayer.
• The substrate should be saturated, usually in 2 coats.
• Drying time: 24h.

• Physical state at 20°C: Liquid
• Appearance: White
• Odour: None
• pH: 8,5 ± 1
• Boiling point [°C]: ± 100°C
• Density: 0.97 ± 0.02
• Solubility in water [vol/vol]: Total
• Flash point [°C]: > 65
• VOC: < 10 g/l

• Keep in a dry place (between 5°C and 30°C).
• Storage: 12 months following the production date when kept in the original unopened container.

• Surfaces should not be treated until they have first been cleaned of all atmospheric pollution and all stains.
• Do not apply to low-porous, organic, metallic or waterproof materials.  
• For ideal application and effective protection, ImperGuard® BC must be stirred. Also, it is essential that it be used only when the substrate temperature is between 5°C and 30°C.
• Do not apply in rain or very hot weather. Air temperature between 5°C and 30°C.
• Do not dilute or mix with another product.

• Respiratory protection: Under normal conditions of use where adequate ventilation is available, no special respiratory protection equipment is needed.
• Hand protection: Wear latex gloves.
• Skin protection: No special protective clothing or skin protection is required under normal conditions of use.
• Eye protection: If there is a real risk of splashing, wear protective goggles.
• If swallowed: Do not induce vomiting. Contact a doctor or a specialist.