Specialist
Solution
Product
Document
Picture
Protection of concrete against water, oil, staining, graffiti, chlorides and corrosionmeets standard en 1504-2:2004.
  • ProtectGuard® CE Special Concrete is the leading product for the protection of concrete. 
  • ProtectGuard® CE Special Concrete durably and deeply protects concrete against water, chlorides, carbonation and corrosion. It also helps tackle the deterioration caused by atmospheric pollution, grease-type staining, penetration of liquids, graffiti... Concrete treated with ProtectGuard® CE Special Concrete will benefit from an increased life-span and will be easier to maintain. 
  • ProtectGuard® CE Special Concrete is a non film-forming impregnation product that leaves the treated surface permeable to air and water vapour. ProtectGuard® CE Special Concrete is completely colourless after application and does not change the appearance or the composition of the treated surface. It is also UV-resistant and does not discolor with age.
  • ProtectGuard® CE Special Concrete is CE marking product, that meets standard EN 1504-2, allowing to provide protection treatments to concretes.
ProtectGuard® CE Special Concrete may be used outside and inside on facades, walls and floors. It is used to protect all kind of concretes, for new and renovated constructions.
  • Protects against water, oil liquids and dirt.
  • Protects against chlorides, carbonation and corrosion.
  • Permanent anti-graffiti protection.
  • Efficiency 10 years.
  • Limits efflorescence formation.
  • High penetrating power.
  • Limits moss and lichen growth and limits dirt due to pollution from building up again.
  • Makes cleaning easier.
  • Prevents deterioration resulting from freeze-thaw cycle.
  • Non film-forming, lets the surface breathe.
  • UV-resistant, does not discolour.
  • Ready to use.

 
Apply using a low pressure sprayer with a Viton seal, an airless gun, a brush or a roller. Wear a protection mask (Type: ABEK) especially when the product is sprayed. On low-porous concretes, apply with a roller.

Clean tools and equipment immediately after use with a solvent.
  • Apply the product to a surface that is clean, dust-free, greasefree and dry. To remove stains and marks of pollution use Guard Cleaner® Polluted Facades. For efflorescence, laitance or concrete bloom use Guard Remover® Eco Efflorescence & Cement.
  • Rinse carefully and wait until the surface is completely dry and free from any cleaner marks before applying ProtectGuard® CE Special Concrete.
  • Use neat, do not dilute.
  • Shake the product well before use.
  • Always carry out a preliminary test.
  • The treated surface should be impregnated to saturation point in one or in two applications ‘wet-on-wet’.
  • Do not over apply the product.
  • The surface must be protected for 24 hours from traffic and liquids (rain, grease...).
  • Optimum effectiveness obtained after 7 days.
  • Physical state at 20°C: Liquid
  • Appearence: Uncoloured
  • Odour: Slight
  • pH: Not applicable
  • Density: 0.9 ± 0.02
  • Solubility in water [vol/vol]: Insoluble
  • Flash point [°C]: > 63°C
  • VOCs: 430 g/l*
Coverage depends on the porosity of the material. The figures below should be used only as a general guideline: 90 to 170 g/m2.
5 and 25 litres containers.
 
  • Keep in a dry place (between -10°C and 40°C).
  • Storage: 12 months following the production date when kept in the original unopened container.
  • Stubborn dirt should be cleaned off with clean water or with Guard Cleaner® Eco Soiled Floors diluted with 50% water.
  • Graffiti can be cleaned using GraffiGuard® 2030 Ecological.
  • We recommend the application of the product on a concrete that has more than 28 days or with a moisture content infe-rior to 5%. For other applications please consult us and make trials.
  • Always work in a well-ventilated space.
  • For best results, ProtectGuard® CE Special Concrete must be shaken and used when the temperature of the substrates is between 5°C and 30°C.
  • Do not apply during rain or in very hot weather. Air temperature between 5°C and 30°C.
  • Do not dilute or mix with any other product.
  • On certain materials, product may increase slightly the original colour (carry out a preliminary test).
  • Respiratory protection: Do not inhale the product. Wear a protection mask (type: ABEK).
  • Hand protection: Wear fluorinated rubber gloves.
  • Skin protection: Wear appropriate protective clothing.
  • Eye protection: Wear protective airtight goggles (ref. stan-dard EN 166).
  • If swallowed: Do not induce vomiting. Contact a doctor or a specialist.
FOR PROFESSIONAL USE
Chemical nature
Fluorinated copolymer and alkylacoxysilane.

Declaration of performance

GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 56
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.732.792
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other