Specialist
Solution
Product
Document
Picture
Special floors
Coloured water and oil repellent for concrete floors 
ProtectGuard® Color Mineral Paint: one product, two functions:
1. Coloured renovator for concrete floors
ProtectGuard® Color Mineral Paint is a coloured product for renovating concrete paving blocks and floors. On a concrete slab or screed, apply ProtectGuard® Color Mineral Paint Primer first. Unlike a paint, ProtectGuard® Color Mineral Paint is an impregnating product that respects the mineral nature of the material and remains permeable to air and water vapour (so no blistering or peeling).
2. Water- and oil-resistant
ProtectGuard® Color Mineral Paint gives long-lasting protection against the main forms of deterioration, such as staining, greasy marks, water infiltration etc. Penetration by water, oil and grime is thus greatly reduced and treated surfaces stay clean.
ProtectGuard® Color Mineral Paint is used on exterior concrete surfaces (paths, patios, yards etc.) that take domestic foot traffic. It is ideal for recolouring and protecting interlocking paving blocks and more than 28-day concrete slabs and screeds.
  • Protects against water, acid rain and grease.
  • Anti-stain, anti-dirt.
  • Improves resistance to soiling.
  • Stands up to moderate foot traffic.
  • Excellent adhesion.
  • Allows substrate to breathe.
  • UV-resistant.
Application on interlocking paving blocks:
  • Apply with a long-haired roller (15-18 mm polyamide fibres) designed for uneven surfaces.
Application on concrete slabs or screeds:
  • Apply with a middle-haired roller (8-15 mm polyamide fibres).
All tools and equipment should be cleaned with water immediately after use.
  • Apply the product to a surface that is clean, dust-free, grease-free and dry. To remove grease marks and marks of pollution use Guard Cleaner® Eco Soiled Floors or Guard Wash®, and for efflorescence, laitance or concrete bloom use Guard Remover® Eco Efflorescence & Cement.
  • Rinse with copious amounts of water from a high-pressure cleaner and allow to dry before applying ProtectGuard®Color Mineral Paint.
  • The substrate, substrate preparation and product application must comply with the latest French unified codes of building practice 59.1 (Paintwork) and 59.3 (Paintwork for floors).
  • Using a spatula, mix the pigment bottle until thoroughly mixed.
  • Shake the container well before use. Use an electric stirrer if necessary to thoroughly disperse the pigments through the product.
  • Always test first for appearance and adhesion.
  • Allow ProtectGuard® Color Mineral Paint to dry for at least 24 hrs before permitting foot traffic and 72 hrs for light vehicular traffic.
  • Optimal performance is achieved after 7 days.
Application on interlocking paving blocks:
  • Apply a single coat of ProtectGuard® Color Mineral Paint.
  • A second coat may be applied if judged aesthetically necessary (allow 2 to 24 hours between coats).
Application on concrete slabs or screeds:
  • Apply ProtectGuard® Color Mineral Paint Primer first with a brush or roller to facilitate adhesion (coverage: 15 to 20 m2/litre). Wait at least 3 hrs and not more than 24 hrs before applying ProtectGuard® Color Mineral Paint. For more information, consult the data sheet for the primer.
  • Physical state at 20°C: Liquid.
  • Colour: Coloured.
  • Odour: None.
  • pH: 9.0 ± 0.5.
  • Boiling point [°C]: 100°C.
  • Relative density: 1.15 ± 0.1.
  • Solubility in water [vol/vol]: Total.
  • Flashpoint [°C]: Not applicable.
  • VOCs: < 35 g/kg*.
Coverage depends on how porous the material is. The following values are for guidance only:
  • Interlocking paving blocks: 2 to 3 m2/kg for one coat.
  • Concrete slabs or screeds: 3 to 5 m2/kg for two coats.
Bucket of 5 Kg.
  • Store in a dry place at a temperature of between 5°C and 30°C.
  • Shelf-life: 24 months from date of manufacture, in original unopened container.
  • Domestic stains can be cleaned off with clean water or a pH-neutral cleaner. Do not use high pressure.
  • Depending on the amount of wear from traffic, apply a new coat directly to the substrate after cleaning.
  • Only treat dry surfaces from which all atmospheric pollution and all stains have been removed.
  • For ideal application and effective protection, it is essential that ProtectGuard® Color Mineral Paint be used when the temperature of the substrates is between 10°C and 30°C and relative humidity < 5%. pH of substrate ≤ 10.
  • Do not apply in the rain or in very hot or windy weather. Air temperature: between 10°C and 30°C with relative humidity < 80%.
  • Do not treat the substrate if there is a risk of rain (no rain for 48 hrs after application).
  • Do not treat polished, icy or crumbly surfaces or surfaces that have already been treated.
  • Provide protection for nearby surfaces and for the person applying the product.
  • ProtectGuard® Color Mineral Paint is not intended for heavy foot traffic or for vehicular use. It is not recommended around swimming pools.
  • Breathing protection: If applying by hand, no protective equipment is required under normal conditions of use.
  • Hand protection: Wear latex gloves.
  • Skin protection: Wear a regularly washed work garment.
  • Eye protection: Wear protective glasses.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
Available Colours
ProtectGuard® Color Mineral Paint come in 42 standard colors. Flat finish. Customers’ own colours can also be incorporated in the laboratory or on site on demand.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 62
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.732.861
Home
Search
Member
Contact
Other
  • Login
  • Register
  • Profile
  • Other